boot0 version : 2.0.0

read dram para.
dram driver version: 1.15
dram size =1024MB
0x00800841
super_standby_flag = 0
Succeed in opening nand flash.
block from 2 to 6
deal block 2
Succeed in reading Boot1 file head.
The size of Boot1 is 0x00068000.
The file stored in 0x00000000 of block 2 is perfect.
Check is correct.
Ready to disable icache.
Succeed in loading Boot1.
Jump to Boot1.
[       0.150] boot1 version : 2.0.0
[       0.159] script installed early ok
[       0.159] pmu type = 3
[       0.161] bat vol = 0 mv
[       0.178] axi:ahb:apb=4:2:2
[       0.178] set dcdc2=1400mv, clock=912M successed
[       0.180] key
[       0.193] no key found
[       0.193] flash init start
[       0.193] NB1 : enter NFB_Init
[       0.196] NB1 : enter phy init
[       0.199] [NAND] nand driver(b) version: 0x0x00000002, 0x0x00000012, data: 0x20130325
[       0.209] get the good blk ratio from hwscan : 944 
[       0.212] NB1 : nand phy init ok
[       4.028] _RepairLogBlkTbl start
[       4.032] Log Block Index 0x00000000, LogicBlockNum: 0x00000129, LogBlockType: 0x00000000
[       4.035] log0: 0x0000033a, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       4.042] datablock: 0x00000345, lastusedpage: 0x00000007
[       4.050] Log Block Index 0x00000001, LogicBlockNum: 0x00000183, LogBlockType: 0x00000000
[       4.056] log0: 0x00000372, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       4.062] datablock: 0x000000e8, lastusedpage: 0x0000001d
[       4.071] Log Block Index 0x00000002, LogicBlockNum: 0x00000160, LogBlockType: 0x00000000
[       4.076] log0: 0x00000382, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       4.083] datablock: 0x000007a4, lastusedpage: 0x0000006b
[       4.092] Log Block Index 0x00000003, LogicBlockNum: 0x00000161, LogBlockType: 0x00000000
[       4.097] log0: 0x0000036f, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       4.104] datablock: 0x000007e4, lastusedpage: 0x0000001b
[       4.109] _RepairLogBlkTbl end
[       4.166] NB1 : init ok
[       4.166] flash init finish
[       4.190] fs init ok
[       4.192] fattype FAT16
[       4.192] fs mount ok
[       4.197] nand good_block_ratio=944
[       4.197] storage_type=0
[       4.243] 0
[       4.463] WRN:L232(Common/ui/display_interface/display_interface.c):fetch script data boot_disp.output_type fail
[       4.468] WRN:L268(Common/ui/display_interface/display_interface.c):fetch script data boot_disp.output_mode fail
[       4.478] WRN:L288(Common/ui/display_interface/display_interface.c):fetch script data boot_disp.auto_hpd fail
[       4.488] lcd0_para.lcd_used=1
[       4.491] 0
[       4.694] 1
[       4.895] 2
[       5.096] 3
[       5.297] 4
[       5.498] 5
[       5.699] tv detect, ret = 0
[       5.699] no device plug
[       5.699] key value = 0
[       5.702] recovery key high 6, low 4
[       5.800] show pic finish
[       5.800] load kernel start
[       5.833] load kernel successed
[       5.833] start address = 0x4a000000
[       6.659] jump to


U-Boot 2011.09-rc1 (Jul 18 2013 - 14:03:58) Allwinner Technology 

CPU:   SUNXI Family
Board: SUN7I-EVB
DRAM:  1 GiB
NAND:  [NAND] set nand_good_block_ratio 944 
3776 MiB
In:    serial
Out:   serial
Err:   serial
--------fastboot partitions--------
-total partitions:11-
-name-        -start-       -size-      
bootloader  : 8000          8000        
env         : 10000         8000        
boot        : 18000         8000        
system      : 20000         100000      
data        : 120000        100000      
misc        : 220000        8000        
recovery    : 228000        10000       
cache       : 238000        a0000       
private     : 2d8000        8000        
databk      : 2e0000        80000       
UDISK       : 360000        400000      
-----------------------------------
bootcmd set setargs_nand
Hit any key to stop autoboot:  0 
sunxi#